Not allowed to see this page

Sun-Chem Sunshine Coast – Gympie

Specialists in all cleaning and degreasing products for Industry and the home

 
 
 
image

Automotive Specialist Products

Sun-chem is Gympie's leading supplier of automotive and industrial products.

imageVINYL SHINE (VLS) Vinyl, Plastic and Rubber Reviver
Hazard Status: “Flammable”
A solvent based silicone polish particularly suited to revive dull vinyl surfaces, rubber and plastic. Restores the rich appearance to upholstery, door trims, dashboards, tyres etc. Protects against weathering and harsh sunlight. Directions: Apply evenly with a soft cloth, or use hand held spray gun. Using a soft dry cloth, wipe off any excess with a polishing action.
5 lt – 20 lt – 200 lt

PROTECTORGLAZE (PTG) Protects and Beautifies all Synthetic Materials
Protects and beautifies materials such as vinyl and other plastics, rubber, finished leather (not suede) and sealed wood against the damaging influence of the environment. Repels dust. Directions: For dirty surfaces, first clean thoroughly with HURRICANE cleaner. Apply evenly with a cloth or sponge or spray directly on to the clean, dry surface. For beast results leave for several hours or overnight.
5 lt – 20 lt

TYRE MATE (TYM) Non – Silicone Gloss Treatment for Rubber, Vinyl & Plastics
Protects and beautifies materials such as vinyl, rubber and plastics with out the usual problems associated with silicones. Directions: Clean surface first with HURRICANE OR AUTO KLEEN, once dry apply directly to tyres using a hand held spray applicator to evenly cover the surface.
5 lt – 20 lt

imageN.C.K. PARTS CLEANER (NCK) Safety Solvent for use in Industrial Parts Washers
A high flash point kerosene developed especially for use in industrial parts washers. Directions: Pour product directly into the holding tank of parTs washer equipment. For parts wash equipment that require water add the specified amount before adding solvent.
20 lt – 200 lt

imagePARTS WASH POWDER -QB (PWP) Quick Break – Alkaline Powder for agitated Parts Wash Machines
Hazard Status: “Cautions”
A concentrated alkaline powder designed to be utilized in automatic parts wash machines. Safe on reactive metals, alloy’s, copper, etc. This product is a corrosive alkali which can cause severe burns. Directions: Industrial machines, Normal use 2 kg : 100 L water, Heavy use; 4 kg : 100 L water.
5 kg – 10 kg – 20 kg

EBS 60 (EBS) Engine Block Soak Cleaner
Hazard Status: “Poisons”
A heavy duty degreasing powder which provides quick, easy removal of heavy grease deposits and oil from ferrous based engine blocks and engine components. Directions: Depending on the soil, dilute: 100-200 ml : 1 L water. Carefully add the powder to cold water while the bath is being agitated. After dissolving the bath can be heated if necessary. Soaking overnight may be needed. Remove the block and hose off.
5 kg – 10 kg – 20 kg

CARBI SOLVENT (CBS) Cold Bath 20ltrs
“CONDITIONS APPLY”
A powerful solvent based decarboniser for the removal of carbon deposits from metallic engine components, utilizing a cold bath technique. Directions: Preclean heavily sOiled parts to prolong thE life of the CARBISOL bath. Immerser the parts in the CARBISOL, making sure that the parts are below the seal level. Allow soaking overnight if necessary.
20 Lt – 200 lt

WAX OFF (WXO) Concentrated Transit Wax & Tar Remover
Hazard Status: “Flammable”
A powerful solvent based cleaner formulated to dissolve and remove stubborn wax coating often used to protect enamel paint work, rapidly penetrates heavy grease, tar and wax ensuring ease of cleaning. Directions: WAX OFF is a concentrated product which must be diluted with Sun-Chem mineral turpentine, white spirits or kerosene PRIOR TO APPLICATION! Normal Deposits: 5 L : 150 L turps, Heavy Deposits: 5 L 100 L turps
5 lt – 20 lt

TARCON (TARCON) Bituimen/Transit Wax Remover
Refer Safety Instructions.
5 lt – 20 lt

PENETRENE 40 (PWP) Water Displacing and Penetrating Metal Protector
Hazard Status: “Flammable”
* Starts Wet Motors * Loosens Rusty, Frozen Parts PENETRENE 40 rapidly displaces water from surfaces such as distributors, relay switches, spark plugs, protects all metal against rust and corrosion. Lubricates and penetrates to loosen rusted metal parts or sticky mechanisms. Directions: Saturate area to be treated using a spray applicator, allow to soak for several minutes before wiping. For best rust protection results, do not wipe off excess. For water stalled engines, spray over distributor, spark plugs and cables.
5 lt – 20 lt

SUN SOLV – IT (SONSOL) Degreaser and Graffiti Remover
Hazard Status: “Flammable”
Contains a blend of citrus solvent with powerful emulsifiers to give a powerful degreaser, deodorant and Graffiti remover. Designed to remove heavy grease, oil, bitumen and refinery tars. Does not affect reactive metals and alloys. Directions: Degreaser: brush, spray, wiping or soaking to degrease surfaces. Mechanical agitation can assist, rinse with water. Tar Remover: apply directly and allow 5 – 10 minutes to penetrate, agitate with a brush and rinse with water. Graffiti Removal: many types of graffiti can be removed using product. Check to make sure that the underlying surface is not affected by the remover.
5 lt – 20 lt



       
VIEW OUR
LATEST
PRODUCTS
  • image

  • image

  • image

CONTACT US
64 Violet Street, Bruce Highway, Gympie, 4570
Phone: (07) 5482 2322
Fax: (07) 5482 1800



We offer over 150 state-of-art unique formulations for home & industry




Click here to Purchase 1 x 20 L House Wash & Get 1L Handy Macc Handwash for FREE!

Sun-chem Gympie will be posting some brand new Youtube videos to our new Website. Please watch this space & check back to see our video infomercials about special offers on all our great Products!
 


image
Website Design
^ Back to Top